Battle Report 9/30/12: Muskets and Tomahawks

A lovely day for some tomahawking!  I was able to get a nice game in today with Dan Kerrick and Roy Scaife.  Dan commanded the British and Roy commanded the French with the Indians being run by yours truely.

The French rolled the Scout mission - same scenario we rolled in the last game, so we were familiar with this one ... needing to scout each 2x2' section of the board and report back to our lines.  The British rolled the Raid mission and had to burn the buildings down of which there were three.  The French subplot was that their leader was angry and bloodthirsty and needed to kill six enemy models while the British officer was a spy and could not be seen my enemy models so as not to compromise the valuable intelligence he just finished collecting from the French camp.

You can see the table setup (a crossroads) and initial movement below.  The Indians and Compagnies Franches de la Marine took advantage of the hidden movement markers.  I've got some great pictures this time --- some with and some without the flash ... I couldn't find my tripod ... but I'll get one ... the suggestion to not use the flash was very good.  Not a largely detailed battle report ... but I have lots of pictures.

I had just finished these new Flight tokens seconds before Dan and Roy arrived.

The initial two turns were spent moving units into position.  The British quickly made it to the large house towards their side and quickly set fire to it - giving me the opportunity to use my many fire lights inside the house to show the effect of fire.

 I particularily like this shot of the fire.

My Indians focused on the left flank against the Rangers while the Compagnie Franches de la Marine went up the right flank.  We hoped the French marines would break through (which they did, killing the Militia to do so) and get around into the far sectors in order to claim them for the scouting mission.  The French regulars for once had some terrain and it was time for the British to advance into the meat grinder while in the open.  The French put up a strong defence of the crossroads and the British paid dearly for attempting to break through.  I'm happy to report that for the first game I didn't rolled terribly for the Indians ... both units put some hurt on the two Ranger units they faced off against ... 3+ aggressiveness is painful ... when you can roll good ... which I did!  I was to be a defend of the left flank with the Indians quickly turned into an attack.  Tomahawks were thrown and hit their mark.

Excellent shot of the volleyfire lights with the house burning in the background.

Another excellent game.  The French pulled out a minor victory while not achieving their subplot while the British did complete their subplot which pushed it into a draw.  This was a nice break from gluing wood to the side of the fort I'm working on but I'm looking forward to getting back to it and completing the Fort William Henry project in the next two weeks.

Fort William Henry Project Update #2

I've been making steady progress with the "wooding" of the fort.  The floor is complete along with the inside log walls.  I've started the gun ports and will work around those until complete.  Then it's the front of the fort walls and the gate house.

Fort William Henry Project Update #1

Quick update ... late night wrapping up the basic fort construction - which is now completed.  On to the attaching of wood to the side.  Pictures below (complete with fort guns).

My Fort William Henry Project

A few months ago, after watching The Last Of The Mohicans for the 1200th time but knowing my French and Indian urges would soon be satisfied by some games of Muskets and Tomahawks, I set about what one could do to make a creative scenario based on the Fort William Henry scenes from the movie.  Arrive project "Fort William Henry" - my attempt to do something I haven't seen done yet (not to say someone out there hasn't done it yet).

First, my thoughts about the scenario.  I didn't want to have to build the entire fort as it really isn't necessary for what I was thinking.  I was looking to build half of the fort or two "faces" of the battlements.  I would deploy the fort along the table edge and it would stick out giving a natural separation to the game table.  On one side there would be the seige action.  Four British guns would face the French seige works.  In addition to the fort I will build a four gun French seige position (four French 24 pounders) complete with wood work and gabions.  In addition to the gun position I would build a three to four section engineer trench (which they were digging to get the mortars into range).  On the other side of the table (a 4 x 10' table) I would have a lake front with canoe docking area. 

The British are attempting to get a "courier to Webb" which occurs when they get a messenger off of a specific section of the table edge.  Once that occurs, there is a small number of turns (randomly checked each turn, increasing the odds each turn) the Britsh would hear back that they should seek terms for their surrender (but we'll call it a British victory ... can't really say that they get rescued now can we).  The French are attempting to force the British to surrender by winning the seige (mortaring the fort) before the British can complete the courier business they are set about doing.  Each turn the French are building the engineering trench.  When complete they win the seige at the end of the turn in which the final section of the trench is complete.  The British guns in the fort can slow the progress of the French engineer trench and the French guns are meant to surpress the British guns in the fort to allow their engineers to work unharrassed.

While all this seiging and courier nonesense is going on there are several side plots that can be accomplished by both the French and the British.  I'm still working on what those will be, but a couple I've been thinking about are the escort of Cora and Alice Munroe from the lake to the fort and a raid on the French ammunition supply area to force the French guns to be slient for a turn or activition (no ammo).

Anyways --- that is where I am at currently.  With all this in mind I've set about building half of Fort William Henry.  I worked off of a diagram I got from the handy-dandy internet.

As you can see, the fort is anything but square so determining which half to use took a little thought.  In the end I split the fort along the red line as depicted in the picture above (intending to build the "left" half).  I then set about scaling up the diagram into something that would work for 28mm (but not be stpudily large as it would actually be if I did it exactly).

Top Diagram

Side Diagram

 Despite my complete lack of artistic skills and any ability to draw (as seen above) it started to come together to the point I could start tracing out the fort on my mapboard (dense cardboard).  After some hacking and slashing today I was able to get something that is starting to look like the foundation of the fort together as pictured below.

Next up I need to work on the interior wall and gun ports.  Once that is all done I think I'll be logging for some time - lots of dowels and such to cut and glue on.  It is coming together now though.  I'll post updates as I make progress and hopefully finish sometime before the sun explodes.