Tuesday, July 24, 2018

Game of Thrones - Kickstarter Arrived + Other Updates

(A bit all over the place today ...)

Just a quick update.  I came home from work today and found to large boxes on my doorstep from CMON - my "Song of Ice and Fire" Kickstarter arrived!

I immediately ran in the house like an excited 8 year old.

Two healthy sized armies ... with some nasty Bolton's to boot!

I have to say, upon close up inspection, the models are very nice.  No assembly required, all the bits are straight, and they are already on a base.  Details are good as well.  Robb Stark model below ...

For size comparison, I took some Lannister Halberdiers and stuck them beside some Blood Bowl Chaos players (they were the most handy figures nearby).

Speaking off ... here is a quick pic of the latest Blood Bowl team for the collection ... Chaos chosen.

And, I'm working on two more ships (one French and one Spanish) ... getting there ... hope to have these done on the weekend.

Getting back into a good pace with the hobby stuff ...

Tuesday, July 17, 2018

Trafalgar Project - French 74 Gun Ship - Héros

Just a quick update today as the ship painting continues ...

I've completed my next ship, the Héros.  The Héros is a French 3rd rate ship of the line with 74 guns.

Painted By:  Jay White

This one painted up much faster than my first one as I had expected.  However, I had to repaint the sides as I wasn't happy with the first colour I used for the French "wine" (red-brown) colour.  Very happy with the results of this ship.  Next up will be the French flagship, which I will be adding a string of signal flags (I'll do this for all the flagships).

Scale is 1/300 - hull is from Old Glory.  Sails and gun ports are 3D printed.

Pictures below ... enjoy!

(3rd Rate, 74 Guns)

The Héros pulls along side of the Spanish 1st rate ship Rayo.

Another angle.



Thursday, July 12, 2018

Beat To Quarters! - 1/300 Scale Napoleonic Naval Rules

Ahoy there!  I've got more for you today.  I've struggled with various sets of of naval rules over the years.  Unfortunately, the style of gaming I like --- a good mix of fun, fast but still somewhat accurate (but abstracted) just doesn't really exist IMO for Napoleonic naval.  At this point, having done a lot with Empires at War and This Hallowed Ground (which needs an update to align with Empires at War), I feel really good about the core mechanics being used in the rules I use.  So, I went ahead and wrote my own for naval now ... and here they are --- version 1.2.

Note:  Version 1.2 --- I'm still play testing through all this.  Happy to take any feedback anyone has if they try out the rules.

Rules can be downloaded here.

Pictures below of the sheets ...

I've included a page that has "right sized" templates for use in the game ... along with a table for random events (below).

I've also done up a quick "ship card" that would be used to track damage for the ships.  The excellent Adam Clark will be laser cutting these out for me ... so the D6's will fit into the board ... super cool!

Tuesday, July 10, 2018

Trafalgar Project - The Spanish Fleet Sails!

Ahoy matey!  I've made a ton of progress on my Trafalgar project.  The first ship was an experiment in many different approaches to assembling and painting.  Since I have a lot of ships to do I needed an approach that didn't result in my taking hours upon hours to paint my ships.

Alas, the first ship I plucked out of the pile is the Spanish 1st rate ship Rayo (100 guns).  This is among the largest ships for the battle.  However, while most of the ships are 3rd rate (74 gun), the length isn't that much shorter than the Rayo ... they just generally have fewer decks.

All ships are 1/300 scale (6mm) from Old Glory Miniatures.

So, what approach was used for this ship that will make all that come after it easier?  Read on ...

The Spanish 1st Rate - Rayo
(Painted by Jay White)

The first is that the masts and sails are 3D printed (see STL file picture below).  If I didn't have these, I'd be spending hours assembling masts and doing sails.  Now, I just print them off and paint them up separately (takes about 15-20 minutes per mast - that includes the sails) - then, glue them into the holes and presto ... hours upon hours saved just right there!  Also, the plastic (PLA) used to print the sails is extremely durable when it comes to accidental touches ... very forgiving where the metal is very much not.

But wait ... there's more!

3D printed sails.

A closer look at the rigging.

The rat lines are easy, I used the metal ones that come with the ship.  The most excellent Adam Clark has laser cut them out of a black rubber ... which once again leverages the miracles of technology to make something that is more durable and doesn't even need to be painted!  While he has shipped me some, they have not arrived ... so for now I'm using the metal ones ... which honestly are not bad at all (just spray black, cut them down and bam!).

Sailing away.

For the base I used 1mm plasticard.  The back of the base is square so that the ship can use the turning template and straight line measurement can be carried out.  The rest of the base is just irregularly formed around the hull of the ship.  I used Woodland Scenics water effects for the water texture.  I also used the water effects to hold the name plate in place for the back of the base.  Once dry it holds it just like glue.

Look out - it's coming right for us!

Painting the sails is easy.  I base spray the 3D printed masts with Zandri Dust from GW.  After painting the masts (GW Zemesi Desert and Black), I use a flattened out medium tank brush (I cut the tip off to give the end of the brush a square shape) and streak the white across the sail horizontally ... following the shape of the sail.  I just keep building up the streaks until I get a nice texture, with some of the Zandri Dust base coat showing through.

But the Old Glory ships don't come with gun ports --- only the cannon barrels?  Yes, that is true.  I 3D printed gun ports!  You can see them in the picture above lining the sides of the ship.  The plastic ends up holding the metal barrels really well ... very solid.

3D printed gun ports.  At 6mm, they are tiny ... I wasn't able
to get the gun barrel included.  But, no worries, the metal
ones actually work really well on them.

Ship with gun ports installed ... I put the barrels on later.

I did up a sheet of my own flags and streaming pennants for the Spanish and French (will do the British shortly).  Gotta have flags!

The Spanish pennant steams in the wind.

The deck was easy.  Base coat of Zemesi Desert, Sepia wash, then a drybrush of 50/50 Zemesi Desert and Screaming Skull.

Closer view of the name plate.

A tip my buddy Roy picked up on the rigging.  Don't use cotton thread, instead buy viskose thread as it lasts much longer and is more durable.  I didn't go crazy with the rigging ... really just did a very basic set of it but it adds to the overall effect.

Side view showing the rigging lines.

So there you have it - the first of the Spanish fleet.  My next ship is a French 3rd rate (74 gun).  I expect this ship to go much faster now that I've figured everything out.  I also have finished the first revision of the rules and will post those up for those that are curious in a separate post.  I've called the rules "Beat to Quarters!"

Stay tuned!