Helm's Deep Project Update #3

My plaster supply is all but gone at the moment ... I have about 1 cup left.  That is 25 pounds of plaster so far.  I will say there is a goodly chunk of waste that comes along with casting ... I've gotten much better but my initial casting was not very efficient.

I have 10 pounds of plaster on order ... and it says it should be delivered today.

My effort this round has been on catching up the side outer wall and tower to the "floor" height of the ramparts.  I also finished up the interior of the door through the side wall and added the door between the interior hallway and center of the Hornburg.  I got the stairs done and floor for the center Hornburg and I'm slowly building up the interior wall.

I'll be finishing up the floor for the hallway and stairs leading up to the entrance to the center part.  Once the flooring is complete I can start building up the interior wall higher ... much higher now and it will make it a little more difficult to do the floor.

The good news in my big fat hands can easily reach into the hallway.

I'll be starting into the floor of the ramparts when the new plaster arrives and building up the rear tower ... that should be done in the next update if all goes to plan ... ha!

Put out a Perry Miniatures ACW figure so you can
get an idea of the scale ...

Starting to take better form now ... stay tuned for more updates!

Helm's Deep Project Update #2

Making more project on this project ... may have to start digging into the booze collection behind it before the end ;-)

Learning a lot about working with the Hurst Arts blocks.  Love them.  Due to some gaps in a few spots I'll have to go in later with some green stuff, but overall it is starting to come together.

The Hornburg is starting to kinda sorta maybe look like the Hornburg ...

Blue foam in place to provide height.

Still working the outer walls up at this point ...

Checking the placement of the side ...

Starting to lose fit the interior walls ...

The inside is started ... planning around the side wall
took a bit with the staircase that has the opening
under it (leading to the deeping wall) ...

Starting to get the outer walls to the height they
need to be at (floor of the walls will go on top
before adding the ramparts) ...

The interior to coming together ... I'm pouring plaster in the
steps to even out the surface ... the cobble will go on top
of that to finish the effects (but the parts are to thin
to hold up without a solid surface under) ...

Opening to the Deeping Wall is coming along while
the staircase grows ...

The interior and rear of the Hornburg are started ...

The last picture shows the interior lose fitted ... I've made a little more progress there with the basic outline glued into position.

I'm happy with the progress so far.  Really happy to start into the back part ... I had check at several points to make sure I would have enough room, but happy to see actual pieces getting glued in place now.

In other news ... although GW re-released the LOTR line, there are still some things that you can't get ... like promo or special figure sets.

Managed to get all the books on the cheap from Ebay.

Merry and Pippin riding the Uruk-Hai express ...

4 x mounted Rohan Royal Guard, a mounted standard bearer,
and mounted/foot Eomer.

Just had to get Gimli sitting on the dead Uruk-Hai ...

And I found a great deal on a bunch (36) riders of Rohan.

Yup, progress ... but a long ways to go.

Helm's Deep Project Update #1

Well, my Helm's Deep project has gotten off to a great start.  I have everything I need to do the project in both materials and miniatures now.  With all the molds from Hirst Arts in hand I set about casting lots of blocks to get me started.

The first thing for me to do was look at the Onyx blog project for reference.  Unfortunately the steps are not detailed enough to build out the whole model ... but there is enough there to save you a lot of time on getting the initial front part of the structure underway.  I've also decided to make some modifications to the basic approach based on careful study of screen captures from the Two Towers movie that I've printed off for reference.

Anyways ... I first had to loose fit blocks together to get an idea of what the structure would look like.  Once that was done I made some changes and then it was time to start gluing the foundation together.  Some pictures below ...

Day 1 ... loose fitting blocks together to see how it would
all go together ...

Once I got the general idea, I focused more on the
foundation, made some modifications, and have set
about gluing parts together ...

Sizing the foundation and build out on a 2 foot by 2 foot
MDF base ... which I will build up with blue foam ...

First wave of blocks that have been cast ... with many
more to be cast ... I might need to order some more
dental plaster!

I know it doesn't look like much right now, but I've made a lot of progress which is not visible, primarily in making sure the whole Hornburg component will fit on the 2' by 2' base and making sure the "inward" design will all fit together and provide the playing space needed for all the models.  I've also given thought to getting my big fat hands in there to move models around ... something not to be overlooked in a model like this!

At the same time while waiting for plaster to dry, I've gotten a start into assembling all the miniatures I need.  I've begun with the forces of good - the dismounted Rohan warriors and Galadhrim.

Rohan foot command

A note on Finecast models from GW ...

Although I've had many disagreements with Games Workshop over the years on multiple fronts, I've always had a respect for the quality of their figures.  Very detailed and well sculpted.  A little on the flashy/dirty side in many cases for their metals ... but nowhere near the worst I've dealt with ... very acceptable from a cleaning perspective, and detail and range of coverage you can't complain about.

I had stopped buying figures from GW many years ago ... far before Finecast arrived on scene.  Some of the new sets I ordered arrived and are Finecast.  Now, the details is outstanding and very crisp.  However, swords and spears ... and other more flimsy parts of the model are not straight!  If you have ever played Zombicide or Battlelore ... you'll know what I mean ... the models are plastic and cast in a flimsy way and usually bent all to hell in ways you can't correct, because cast plastic wants to keep to it's form.  I'm not in the business of attempting to slightly melt plastic to correct casting flaws ... "ain't got time for that" ... which is utterly ridiculous that a Finecast model from GW would have similar issues ... something that they are charging you extra for!!!  Shit!!! (*&^#($*&^#@$!!!!  Give me back basic plastic or metal ... I'll be happy to pay less!!!

Anyways ... fortunately I've been able to correct most of the worst of it ... e.g. cutting away the standard bearer's pole and replacing it with a brass pole (I wish I took a picture of what it looked like before I did it ... the flag was bent over about 45 degrees because of the weight of the cast ... stupid!!).  Oh well ... most of the models I have are second hand and of the original range ... so not a big issue for me ... but I pity anyone getting this crap in any sizable numbers.

Okay, enough complaining ...

Rohan characters ... left to right ... Grimbold, Hama, Eowyn,
Theoden, and Gamling.  Poor Hama, eaten by a Warg ...
still, I love the miniature and he'll just be a regular old
guard captain for Helm's Deep :-)

Rohan Royal Guard contingent ... oh yeah!

Assembly in progress ... foreground is Galadhrim and
behind is Rohan ... still more to build.

So not a bad start.  Once I get all the Rohan and Galadhrim figures assembled I'll be sending them out for painted to my trusty friend Mr. Steve Dake ... who will do an absolutely amazing job on them.  After that it is the slug through 300 Uruk-Hai warriors ... yikes!

Stay tuned ... I'll continue to post project updates as I get more done.